CN EN
Home>Products>CHILI PROCESSING MACHINE
Fresh Chili Chopper

Fresh Chili Chopper

Specifications:
Motor capacity: 3kW
Voltage: 220 volts
Machine weight: 200 kg
Cutting length: 1-60mm
Power supply: 220 volts single phase
Output: 500-800KG/HR


Product introduction:

The fresh chili chopper is a chili processing equipment developed by our company. It is mainly used for the mincing of fresh chili. The protective cover of the equipment is made of plexiglass. The specific operation status can be observed. The chopper adopts the imitation manual to realize the chop work, and can adjust the chopped degree of the chili. It has the advantages of simple operation, convenient maintenance, cleanliness, reliability, high efficiency and so on.


Scope of application:

The fresh chili chopper is suitable for the catering industry and food processing industry that need to process fresh chili. It can chop, cut, and shred fresh chili.


Product advantages:

1. The protective cover of the fresh chili chopper is made of plexiglass, which is more reliable in application.

2. When working, you can see the running status of the fresh chili chopper knife, to prevent the cut chili from plugging the knife, there is a vibrating screen inside, which can separate the chili from the chili seeds.

3. The fresh chili chopper is developed and manufactured by simulating the principle of manual cutting, which is simple to operate and easy to maintain.

4. The machine adopts the length-adjusting process. The length of the cutting section can be adjusted according to the user's needs within a certain range, and the operation of adjusting the length is simple.

5. The whole equipment shell is made of thickened stainless steel plate, which is clean, hygienic, reliable and efficient.

6. The conveyor belt automatically transports the chili to the knife edge, imitating the manual chopping work, and can directly adjust the chili from the cutting edge to cross-cut chili rings and chili segments with a length of 1-40mm.


Notes:

1. Check whether there is dirt in the shell of the fresh chili chopper, and remove the dirt in the shell, otherwise it will easily lead to damage to the blade.

2. If you find that the fresh chili chopper is not working properly, you should immediately disconnect the power supply, stop the machine to check the reason, and prohibit unauthorized dis-assembly of mechanical and electrical equipment parts, which must be repaired by professional maintenance technicians.

3. The operator should stand on the side of the feeding port, and it is forbidden to put hands into the feeding port, and the machine cover should not be opened during operation and before the machine is stopped stably.

4. When the fresh chili chopper is out of use, the debris outside the machine should be removed, all rotating parts should be filled with grease, and stored in a warehouse with dry air and no corrosive gas.


ENQUIRY MESSAGE

Name
Tel*
E-mail*
Address

kf_top
  • Wechat Wechat
    Wechat
  • Whatsapp Whatsapp
  • Skype Skype
  • Youtube Youtube
  • Twitter Twitter
kf_back