CN EN
Home>Products>CHILI PROCESSING MACHINE
Chili Dicer

Chili Dicer

Specifications:
Net weight: 120 KG
Motor capacity: 750W
Voltage: 220 V
Motor capacity: 130-660 KG/hour
Dimensions: 900*460*740MM


Product introduction:

The chili dicing machine is made of stainless steel and has the characteristics of cleanliness, hygiene and reliability. This equipment is widely used in food manufacturers that need chili. It can diced 300-500 kilograms of chili per hour. , When the chili dicing machine is working, you can see the operation of the chili dicing machine knife, to prevent the cut chili from plugging the knife, and there is a vibrating screen inside, which can separate the chili from the chili seeds.

Scope of application:

The chili dicing machine is mainly used for dicing dry chili, fresh chili, green chili, etc. It is widely used in food manufacturers that need chili.


Product advantages:

1. The protective cover of the chili dicing machine is made of plexiglass, which is more reliable in application.

2. The whole equipment shell is made of thickened stainless steel plate, which is clean, hygienic, reliable and efficient.

3. Small chili dicing machine, which can process 300-500 kg in 60 minutes. This equipment is a good machine for chili processing enterprises, food factories, chili production areas, etc. to carry out deep processing of chili.

4. It is developed and manufactured by simulating the working principle of manual dicing, the operation is relatively simple, and the maintenance is convenient and fast.

5. When working, you can see the operation of the chili dicing machine knife, to prevent the cut chili from plugging the knife, there is a vibrating screen inside, which can separate the chili from the chili seeds.

6. Reasonable structure, easy operation of chili dicing machine, simple adjustment and convenient maintenance of dried chili dicing machine


Notes:

1. Carefully check whether the chili dicing machine is defective, damaged or loose, and ensure that the machine is in good condition.

2. Always check the firmness of each component to prevent it from falling off and damaging the equipment.

3. If you find that the chili dicing machine is not working properly, you should immediately disconnect the power supply, stop the machine to check the reason, and prohibit unauthorized disassembly of mechanical and electrical equipment parts, and must be repaired by professional maintenance technicians.

4. It is forbidden to run the small chili dicing machine under load. When the feeding port is blocked, it is forbidden to force feeding by hand or wooden stick, and it should be stopped immediately for inspection. When working, it is necessary to feed the material properly and evenly. If there are semi-wet materials that are not dry, try to dry them, or reduce the feeding amount.

5. Clean up the operation site, check whether the working voltage of the power supply is consistent with the working voltage of the machine, and whether the grounding mark is reliably connected to the grounding wir



ENQUIRY MESSAGE

Name
Tel*
E-mail*
Address

kf_top
  • Wechat Wechat
    Wechat
  • Whatsapp Whatsapp
  • Skype Skype
  • Youtube Youtube
  • Twitter Twitter
kf_back